If it is a mold, use an electrolytic ultrasonic cleaning machine. Plastic residues, high-temperature sulfides, gas and other substances attached to the surface of the mold can be completely removed. The cleaning time is fast and can be completed in ten minutes, causing no damage to the mold and saving time,

At present, Shenzhen Xinwandeshengchao Equipment Co., Ltd. is producing such machines. You can contact us,

Cleaning principle:

1. The electrolytic cleaning system emits gas to the metal surface, using the effect of a sauna to remove dirt and impurities from the metal surface, and can also completely remove resin components and moisture; Through the vibration of ultrasonic waves, dirt is peeled off and floating, and metal adheres to the cathode. Even dirt in relatively small corners can be completely removed
2. Restore the metal to its original copper green color and restore its original beauty
3. Even complex shapes can remove dirt. Cleaning machine
4. The mold can be completely and truly clean and stain free
5. It has good rust removal and rust prevention effects
6. It saves one hour more time than manual cleaning to clean the machine
7. It is more environmentally friendly and safe than using organic solvents, greatly reducing the defect rate after cleaning

 

 

 

Disclaimer:The authenticity of this information has not been verified by our website and is for your reference only. The purpose is to convey more information; If there is any error, error, or infringement, please contact us via email（ [email protected] ）We would greatly appreciate it if you could promptly notify us of the error, error, or infringement, and we will promptly make corrections or deletions.